1 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change nrb-xg series miniature aluminum electrolytic ca pac i tors high ripple current, radial leads, polarized, aluminum elec tro lyt ic ? long life at 105c (8,000 hours) ? high voltage (up to 400v) ? reduced size & high ripple current features characteristics rated voltage range 200 ~ 400vdc capacitance range 1.5 ~ 27 f operating temperature range -40c ~ +105c capacitance tolerance 20% (m) maximum leakage current at 20c cv < 1,000 cv > 1,000 0.1cv + 40 a after 1 minutes 0.04cv + 100 a after 1 minutes 0.03cv + 15 a after 5 minutes 0.02cv + 25 a after 5 minutes max. tan at 120hz/20c w.v. (vdc) 200 400 s.v. (vdc) 250 450 tan 0.20 0.25 low temperature stability impedance ratio @ 120hz w.v. (vdc) 200 400 z-25c/z+20c 3 6 z-40c/z+20c 8 16 load life hours load life test at rated w.v. & 105c test 8,000 hours capacitance change within 20% of initial measured value tan less than 200% of speci ed value leakage current less than speci ed value nrb-xg 100 m 200v 8x11.5 tb f tb = tape & box* working voltage tolerance code m=20% capacitance code in f series case size (mm) rohs compliant part number system *see tape speci cation for details precautions please review the notes on correct use, safety and precautions found on pages t10 & t11 of nic?s electrolytic capacitor catalog . also found at www.niccomp.com/precautions if in doubt or uncertainty, please review your speci c application - process details with nic?s technical support personnel: tpmg@niccomp.com *see part number system for details pnbs fdil rohs compliant includes all homogeneous materials
2 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change nrb-xg series miniature aluminum electrolytic ca pac i tors part number cap. ( f) w.v. (vdc) dissipation factor +20c/120hz lc ( a) after 5 min. ripple current rating (arms) +105c/120hz max. esr ( ) 120hz load life hours @+105c nrb-xg4r7m200v6.3x11f 4.7 200 0.2 43.2 56 70.6 8000 nrb-xg5r6m200v6.3x11f 5.6 0.2 47.4 60 59.2 8000 nrb-xg6r8m200v6.3x11f 6.8 0.2 52.2 68 48.8 8000 nrb-xg8r2m200v8x11.5f 8.2 0.2 57.8 96 40.5 8000 nrb-xg100m200v8x11.5f 10 0.2 65 104 33.2 8000 nrb-xg120m200v8x11.5f 12 0.2 73 112 27.6 8000 nrb-xg150m200v8x16f 15 0.2 85 144 22.1 8000 nrb-xg150m200v10x12.5f 15 0.2 85 148 22.1 8000 nrb-xg180m200v10x12.5f 18 0.2 97 164 18.4 8000 nrb-xg220m200v10x16f 22 0.2 113 200 15.1 8000 nrb-xg270m200v10x16f 27 0.2 133 208 12.3 8000 nrb-xg1r5m400v6.3x11f 1.5 400 0.25 33 36 276.5 8000 nrb-xg1r8m400v6.3x11f 1.8 0.25 36.6 38 230.4 8000 nrb-xg2r2m400v6.3x11f 2.2 0.25 41.4 40 188.5 8000 nrb-xg2r7m400v8x11.5f 2.7 0.25 46.6 60 153.6 8000 nrb-xg3r3m400v8x11.5f 3.3 0.25 51.4 64 125.7 8000 nrb-xg3r9m400v8x11.5f 3.9 0.25 56.2 68 106.3 8000 nrb-xg4r7m400v8x16f 4.7 0.25 62.6 88 88.2 8000 nrb-xg4r7m400v10x12.5f 4.7 0.25 62.6 92 88.2 8000 nrb-xg5r6m400v10x12.5f 5.6 0.25 69.8 100 74.0 8000 nrb-xg6r8m400v10x16f 6.8 0.25 79.4 120 61.0 8000 nrb-xg8r2m400v10x16f 8.2 0.25 90.6 128 50.6 8000 standard product, specifications and case sizes d x l (mm) frequency (hz) 120 1k 10k 100k 1.5 f ~ 27 f 1.0 1.7 2.2 2.5 ripple current frequency correction factor diameter and leadspace (mm) case dia. (d ) 6.3 8.0 10 lead dia. (d ) 0.5 0.6 0.6 lead spacing (f) 2.5 3.5 5.0 dim. 0.5 0.5 0.5 dim. 2.0 2.0 2.0 dimensions (mm) d 0.05 pet sleeve f 0.5 d 4mm min. 15mm min. l + max. polarity marking drawing is representative of parts as supplied in bulk or straight lead format, please see taping speci cation for details on taped format packaging. - + top vent
3 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change nrb-xg series miniature aluminum electrolytic ca pac i tors taping dimensions (mm) standard radial taping (5mm lead spacing, formed leads) tb case dia. (d ) 6.3 8 case size 6.3x11 8x11.5 dim. d 0.05 0.5 0.6 h 0.75 18.5 20.0 f +0.8 ~ -0.2 5.0 -02 ~ +0.8 p 12.7 1.0 p 0 12.7 0.2 p 1 3.85 0.5 (at end of tape) p 2 6.35 1.0 w 18.0 0.5 w 0 11.5 min. w 1 9.0 0.5 w 2 0 ~ 2.5 h 0 16.0 0.5 i 1.0 max. d 0 4.0 0.2 h 0 1.0 (at top of can) t 0.7 0.2 (not including lead) p 2 p ? d p 1 w 2 w 0 w 1.0 p 0 f s ? d 0 ? d w h h 0 1max t h taping dimensions (mm) special straight lead taping tbst* case dia. (d ) 6.3 8 case size 6.3x11 8x11.5 dim. d 0.05 0.5 0.6 h 0.75 18.5 20.0 f +0.8 ~ -0.2 2.5 3.5 p 1.0 12.7 0.2 p 0 12.7 0.2 p 1 5.1 4.6 p 2 6.35 1.0 w 18.0 0.5 w 0 11.5 min. w 1 9.0 0.5 w 2 0 ~ 2.5 h 0 16.0 0.5 i 1.0 max. d 0 4.0 0.2 h 0 1.0 (at top of can) t 0.7 0.2 (not including lead) 1max t h p 2 p ? d p 1 w 2 w 0 w 1.0 p 0 f s ? d 0 ? d w 1 h *straight leads will extend from the based of the component to the edge of the carrier. the section of lead below the adhesive tape may be straight or formed.
4 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com specifications are subject to change miniature aluminum electrolytic ca pac i tors nrb-xg series taping dimensions (mm) note: anode (+) lead feeds off first. for option of negative ( _ ) lead first, specify ?tbn?. case dia. (d ) 10 case size all dim. d 0.6 0.05 h 18.5 +0.75/-0.5 f 5.0 +0.8/-0.2 p 12.7 1.0 p 0 12.7 0.2 p 1 3.85 p 2 6.35 1.0 w 18.0 0.5 w 0 11.5 min w 1 9.0 0.5 w 2 0 ~ 2.5 h 0 16.0 0.5 i 1.0 max. d 0 4.0 0.2 h 0 1.0 (at top of can) t 0.7 0.2 (not including lead) radial taping (5mm lead spacing) tb 1max t h p 2 p ? d p 1 w 2 w 0 w 1.0 p 0 f s ? d 0 ? d w 1 h
|